Araldite AGOMET F305AB,No mix adhesive,Bonding Ferrite,Fast curing,bonding ferrite
Agomet F305 A/B is a low viscosity two component, room temperature curing, “No-mix” methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time.... |
|
|
|
|
Araldite AGOMET F120,No mix,High temperature resistant adhesive,High strength,Fast curing
Araldite AGOMET,F120,methacrylate for metal bonding,has a short potlife of 30 - 90 seconds and is therefore ideally suited for bonding operations where, e.g., high output quantities are required in series production.
... |
|
|
|
|
Araldite AGOMET F121AB,No mix adhesive,Bonding Ferrite,Fast curing,bonding ferrite
Araldite Agomet F121 AB is a low viscosity two component, room temperature curing, “No-mix” methacrylate adhesive suitable for bonding metals and plastics. Its high setting rate at room temperature allows handling of the bonded parts within a very short time. The adhesive has an assembly time of 3 - 5 minutes. As early as 6-8 minutes after joining (curing at room temperature), the parts can be handled. The final strength is attained within 24 hours. Bonds produced with Agomet F121 A/B show good tensile shear and peel strengths as well as good resistance to moisture.... |
|
|
|
|
Agomet Hardener powder,For Agomet Adhesives based on methacrylate or styrene,1kg
Agomet Hardener Powder For Agomet Adhesives based on methacrylate or styrene,For transparent applications and for low viscosity systems (preferably up to 25 Pa.s). No guaranty for sufficiently thorough mixture with high viscosity systems,Amount added 2-5% of weight.... |
|
|
|
|
|
